506803 6EC-CIA-RF

Handling up to 1/2" (12.7 mm) solids, this Automatic Submersible Sump/Effluent Pump is made of heavy-duty cast iron construction with 10 ft power cord. Equipped with a permanent split capacitor (PSC) motor with thermal overload protection, cold rolled steel motor shaft, 1'3 hp motor and delivers an energy-saving low amp draw.

Item: 506803
Model: 6EC-CIA-RF

Ratings

HP 1/3 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 5 A
Amps - Starting 11.5 A
Full Load Watts 600 W
Volts 115 VAC
Cord Length 10 ft
Pump Power Cord Type SJTW
Pump Power Cord Gauge 18-3
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes
Maximum Flow Rate - 60Hz 53 gpm / 3180 gph
Minimum Flow Rate - 60Hz 2 gpm / 120 gph
Shut-Off 28 ft
Minimum Head - 60Hz 5 ft
Shut Off Height - 60Hz 28 ft
Stages 1
Max Solid Handling Size 0.5 "
Switch Type Piggyback Mechanical Float
Motor Cooling Oil

Liquid

Max Fluid Temperature 140 °F

Materials of Construction

Pump Base Material Plastic
Pump Body Material Cast Iron
Pump Volute Material Polypropylene
Impeller Type Non-Clog
Impeller Material Nylon
Motor Shaft End - Material SAE 1040/45 Carbon Steel
Intake Screen Material Nylon
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Bottom Bearing Material Steel
Bottom Bearing Type Ball Bearing
Seal Material Carbon/Ceramic, Nitrile
Seal Type Mechanical Seal

Installation

Discharge Type Threaded - FNPT
Discharge 1.5 "
Product Length 8.79 "
Product Width 8.48 "
Product Height 11.08 "
Pump Length 8.79 "
Product Weight 27.5 lb
Product Weight w/ Pack 27.74 lb
Carton Length 11 "
Carton Width 10 "
Carton Height 13 "
Off Level - Range 6" - 8"
On Level - Range 13" - 15"

Other

Accessories Included None
Minimum Order Quantity 1
Electrical Agency Approvals CSA
Standard Warranty 12 Months
  Warranty Terms Link