509807 – 9EC-CIM
4/10 hp effluent pump, 115V, 30' cord, manual operation, 1-1/2" discharge
| Item: | 509807 |
| Model: | 9EC-CIM |
Ratings |
|
| HP | 0.4 hp |
| Frequency | 60 Hz |
| Phase | Single-Phase |
| Amps - Full Load | 4 A |
| Amps - Starting | 10 A |
| Full Load Watts | 820 W |
| Volts | 208 VAC / 230 VAC |
| Cord Length | 20 ft |
| Pump Power Cord Type | SJTW |
| Pump Power Cord Gauge | 18-3 |
| Motor Type | Submersible |
| Continuous Duty | Yes |
| Thermal Overload Protection | Yes |
| Maximum Flow Rate - 60Hz | 70 gpm / 4200 gph |
| Minimum Flow Rate - 60Hz | 5 gpm / 300 gph |
| Rated Flow Rate - 60Hz | 22 gpm / 1320 gph |
| Max Flow Rate - 50Hz | 70 gpm / 4200 gph |
| Shut-Off | 37 ft |
| Minimum Head - 60Hz | 5 ft |
| Shut Off Height - 50Hz | 37 ft |
| Shut Off Height - 60Hz | 37 ft |
| Stages | 1 |
| Max Solid Handling Size | 0.75 " |
| Switch Type | Manual |
| Motor Cooling | Oil |
Liquid |
|
| Max Fluid Temperature | 140 °F |
Materials of Construction |
|
| Pump Base Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Pump Volute Material | Cast Iron |
| Impeller Type | Non-Clog |
| Impeller Material | Thermoplastic Elastomer |
| Motor Shaft End - Material | Steel |
| Check Valve | No |
| Intake Screen Material | Cast Iron Epoxi |
| Fasteners Material | Stainless Steel |
| Top Bearing Material | Steel |
| Top Bearing Type | Ball |
| Bottom Bearing Material | Steel |
| Bottom Bearing Type | Ball Bearing |
| Seal Material | Carbon/Ceramic, Nitrile |
| Seal Type | Mechanical Seal |
Installation |
|
| Discharge Type | Threaded - FNPT |
| Discharge | 1.5 " |
| Product Length | 8.9 " |
| Product Width | 8.4 " |
| Product Height | 11 " |
| Pump Length | 8.9 " |
| Product Weight | 30.4 lb |
| Product Weight w/ Pack | 31.4 lb |
| Carton Length | 11.42 " |
| Carton Width | 9.41 " |
| Carton Height | 13.78 " |
Other |
|
| Accessories Included | None |
| Electrical Agency Approvals | CSA |
| Standard Warranty | 12 Months |
| Warranty Terms Link | |
