509685 – 9SP2V2D
The redesigned Pit+Plus basin features a separate pump and switch access cover, while incorporating molded-in discharge and vent ports for simplified service and installation. This allows the contractor to access the pump and/or switch independently without disruption to the plumbing connections, saving time, money, and mess.
| Item: | 509685 |
| Model: | 9SP2V2D |
Ratings |
|
| HP | 0.4 hp |
| Frequency | 60 Hz |
| Phase | Single-Phase |
| Amps - Full Load | 8 A |
| Amps - Starting | 20.15 A |
| Full Load Watts | 870 W |
| Volts | 115 VAC |
| Cord Length | 20 ft |
| Pump Power Cord Type | SJTW |
| Pump Power Cord Gauge | 18-3 |
| Motor Type | Submersible |
| Continuous Duty | Yes |
| Thermal Overload Protection | Yes |
| Maximum Flow Rate - 60Hz | 100 gpm / 6000 gph |
| Minimum Flow Rate - 60Hz | 4 gpm / 240 gph |
| Shut-Off | 20 ft |
| Shut Off Height - 60Hz | 20 ft |
| Max Solid Handling Size | 2 " |
| Switch Type | ECM |
| Motor Cooling | Oil |
Liquid |
|
| Max Fluid Temperature | 140 °F |
Materials of Construction |
|
| Pump Base Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Pump Volute Material | Cast Iron |
| Impeller Type | Vortex |
| Impeller Material | Nylon |
| Motor Shaft End - Material | 420 Stainless Steel |
| Fasteners Material | Stainless Steel |
| Top Bearing Material | Steel |
| Top Bearing Type | Ball |
| Seal Material | Carbon/Ceramic, Nitrile |
| Seal Type | Mechanical Seal |
Installation |
|
| Discharge Type | Threaded - FNPT |
| Discharge | 2 " |
| Product Length | 24 " |
| Product Width | 24 " |
| Product Height | 32.56 " |
| Pump Length | 10.4 " |
| Product Weight | 149.91 lb |
| Product Weight w/ Pack | 68 lb |
| Carton Length | 26 " |
| Carton Width | 26 " |
| Carton Height | 35 " |
| Off Level - Range | 2" - 4" |
| On Level - Range | 10.25" - 12.25" |
Other |
|
| Accessories Included | Pre-Assembled: 20"x30" Polyethylene Basin with stub out intake, 1-Piece Structural Foam Bolt-on Cover, 2" discharge, 2" vent, with 9SC-CIM Sewage Pump (Item 509413) 115V 4/10HP, piggyback ECM switch and includes finish cover. |
| Pump Component Part Number | 509413 |
| Standard Warranty | 36 Months |
| Warranty Terms Link | |
