Highly Corrosive Chemical Transfer Pumps

TE-5-MD-HC Series Magnetic Drive Pump

Highly Corrosive Chemical Transfer Pumps

TE-5-MD-HC Series Magnetic Drive Pump

The TE-5-MD-HC is used as a non-submersible or in-line pump for circulating highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions compatible with the pump's material of construction. 

Features & Benefits

  • 1/8 hp TEFC PSC motor
  • Glass-filled polyphenylene sulfide magnet housing and volute
  • 1.1 specific gravity
  • Fluoroelastomer (FKM) O-ring
  • Ceramic thrust washers and shaft
  • Run dry capability up to 8 hours

Overview


The TE-5-MD-HC features the patented Little Giant magnetic drive pump design driven by an enclosed, fan-cooled permanent split capacitor motor. The motor is thermally protected to prevent dangerous overheating which can result in possible motor failure. The volute, housing, and impeller are constructed of glass-filled Ryton® with carbon bushing added to the impeller for added corrosion resistance. This pump is designed to handle fluid temperatures to 200 °F (93.3 °C).

Specifications


Capacity 20 gpm @ 1'
Shut Off 29.3' (8.9 m)
Max. Liquid Temp. 200 °F (93.3 °C)
Discharge 1/2" MNPT (12.7 mm)
Impeller Glass-filled polyphenylene sulfide w/ carbon bushing
Electrical 115 V, 50/60 Hz, 2.3/3 A
230 V, 50/60 Hz, 1.3/1.4 A

Performance

Performance

115 or 230 V, 60 Hz

Head GPM (LPM)
1' 20 (76)
3' 19.2 (72.7)
6' 18.2 (68.9)
9' 17 (64)
15' 14.8 (56)

Order Information


TE-5-MD-HC Series Chemical Transfer Pump

Item Model Volts Maximum Flow Rate - 60Hz Shut-Off Flow Rate At 1ft
584604 TE-5-MD-HC To Be Configured 20 gpm / 1200 gph 29.3 ft

TE-5-MD-HC Series Chemical Transfer Pump - Pump Head Only

Item Model Description
584698 TE-5 TE-5-MD-HC, Magnetic Drive Pump Less Motor, 17.5 GPM